The spinning can looks simple enough; run a wire through a beer or soda can and suspend it over a bucket of water. A stick or ruler is placed so he can climb up the bucket and peanut butter is put on the can to entice the mouse. When he gets to the can it spins like a log in water and he falls. Of course the mouse drowns in this scenario but you can leave the bucket empty but you’ll need to release him after he is caught.
3. If it weren’t for rats, millions of humans would not have died over our history, so “population control” has certainly been forwarded by their natural ways. Kudos to them or my traffic problems would be even worse than they already are.
I bought one from Groupon, only 15US$ I just try it today, try to get rid of cockroach, 2 inches big one from my kitchen. I wonder, will it drive it out of the kitchen into my living room? By the way, the using the device as a hammer comment was funny.
A: Remove the small staple holding the locking bar to the wood base. Place bait inside curl found at the end of the bait pedal.  Pull back bow and hold down with thumb. With other hand, engage the curved portion locking bar under the small, V-shaped lip on the bait pedal.
I have a huge rat problem going on… They are in the crawl space above my kitchen having a grand ol’ time and living quite comfortably. I didnt notice the screen covers on the vents have holes in them and they just climb the stucco to get up there – this was pointed out to me by a pest control inspector. Worst of all there is no way for a person to access this area to get them out, nor poison them and have them die up there, potentially.
This trap is very easy to set. I don’t understand how so many people have trouble setting them up. My problem is that the mice ate the bait and the trap did not trigger. This has happened for two consecutive nights now, regardless of setting them on the sensitive mode, and testing them to make sure they trigger at very slight contact.
Almost all of us grew up eating meat, wearing leather, and going to circuses and zoos. We never considered the impact of these actions on the animals involved. For whatever reason, you are now asking the question: Why should animals have rights? Read more.
Big momma rat has no chance with the victor electric rat trap. Just a little peanut butter, turn it on, ZAPPP, and dump it out! This one was so big it would hardly come out of the chamber when finished.
Change of plans. This bucket trap may work for mice but not for this nemesis! As Roy Scheider, star of Jaws, said when he laid eyes on the shark, “Your going to need a bigger boat.” When dealing with Ratzilla and his kin, you’re going to need a bigger bucket!
Other Sites

These noises are often accompanied by a vibration in the chest cavity, in fact if you rest your fingers lightly on there back you can often feel the vibrations before you can hear the noise.  These are noises associated with damage to the respiratory tract and often the first sign of a respiratory issue.  In some cases a rat can have scarring or a genetic defect causing it to make these noises even when not ill, however its important to rule out respiratory issues with a course of antibiotics before assuming this.
Place the tube on the edge of a countertop or second story landing. Place the tube in such a way so that about 40% of it, including the baited end, hangs over the edge of the landing.[2] If necessary, affix the tube with a small piece of tape, but take care not to tape it so firmly that it would not give way and tip over the edge of the landing or countertop when the baited end was subjected to slight force.
Removable Lid Ensures Easy Cleaning The sleek industrial design boasts a removable lid, providing convenient access to the trigger plates so you can easily clean it in between uses. Once a catch is made, power off the trap and remove the lid. Then simply dispose of the dead rodent in the trash without ever having to touch it!
At about 5:45 of the video, you can see how the bait is set up with a small needle or maybe a toothpick that goes through the hole and held up by the red band. The rat, or mouse, enters in through the trapped door, pulls at the bait, which releases the tension by releasing the line to the door, and the rubber bands pull the door shut holding so much force as to keeping it closed.
Place the trap where you have seen signs of rodent activity or along the wall where rodents primarily travel. The end of the trap where the metal pedal is baited should be placed flush against the wall.
There is one, having tried many that actually works here in Spain. It is a free app for iPhones and iPads and you can download it from iTunes here https://itunes.apple.com/gb/app/ultra-sonic-mosquito-repeller/id1116453268?mt=8
Consider kill traps. Electronic kill traps are widely considered to be the most effective method of removing mice and rats from your home. They are also safer for non-rodents in your home, and easier to dispose of compared to other kill traps. While they are more expensive, they are the quickest way to rid your home of mice and rats, and are the most humane type of kill trap. (Live traps, however, are the most effective way to get squirrels out of your home.[8])
If you think you’ve got a rat to deal with, pour about 6 to 8 inches of water in the bucket.Big rats can jump. The water prevents the vermin from leaping to freedom. For mice, use less water. At least that’s the theory…
Living on a lake in Norcal lotsa spiders flies etc. Cats brought in some fleas so put in 5 of these electronic devices with high amaxzon rating from actual purchasers. Flypaper and sticky traps show drastic reduction in corpus and fly’s went away pronto. I put 2 pest strips ( toxic ) in attic spray bedding with Vets Best and cut up generic Seresto flea collars in 1 inch strips under cover and pet towel ( silver threads antimicrobial ). A battle with insects requires a combined assault.
We had mice in the kitchen and garage. I put one plug-in reller in the kitchen and two in the garage. After about a week, no more mice incidents at all. That was over a year ago. Now to tackle the backyard with more powerful models to see if that will be a success as well.
The Victor Electronic Rat Trap is the ultimate in rodent control. It works by delivering a humane, high-voltage shock to effectively kill the invading rat. This powerful device is capable of killing up to 50 rats per set of fully charged batteries (4 C), making it a great value when you’re dealing with a sizable infestation. It’s also easy to use! Get started by simply applying a high protein bait in the provided bait cup, place the trap in a location with high rodent activity and turn it on. The trap is equipped with advanced smart circuit technology, which senses when a rat enters the tunnel, triggering the system to deliver a humane, high-voltage shock once the rat steps on the electrified plate. Since rats have the ability to restart their hearts after an electrical shock, this trap applies shock for 2 minutes to ensure higher kill rates. After making a catch, a green LED light blinks to indicate a kill. For your convenience, the trap’s design allows you to easily dispose of the dead rodent without having to see or touch it. The new and improved design of the electronic trap has a removable kill chamber, which provides better plate access so you can easily clean and bait it in between uses. These traps require no poison or chemicals and can be used anywhere inside your home or business to ensure years of effective rat control.
Glue traps never work to keep rodents away in the long run, and their use will actually backfire. This is because when animals are killed or otherwise removed, the resultant spike in the food supply causes accelerated breeding among survivors and newcomers—and this means increased populations. The only surefire way to keep mice and other animals out of your house is to make it less inviting to them.
THIS is an exceptional electronic execution chamber for rats! I reviewed all of the brands available and chose this one as my best prospect, and I was right. What surprised me though is the fact that very little of the trap’s advantages were advertised before I purchased it. For instance, the clever physical design of the chamber resists the rat’s auto-response once electricity begins to flow and prevents him from spontaneously “leaping away” from the deadly electric panels. Also, since having caught/killed several rats, I noticed that the bait is always consumed before the rat is electrocuted — I suspect that there is 5-or-so seconds delay before the electricity flows, giving the rat time settle down and become less alert while enjoying the bait… then, it’s all over for him with a 2-minute constant electrical surge that kills him and assures no quick spontaneous restart of his heart… on a small scale perhaps, but some real engineering! My compliments to Victor. (BTW, the green light is not very good, but who cares)
For those interested, I grew up in “Rat City”, South Seattle neighborhood called White Center. My mom would have me put out DeCon(sp?) rat poison under the house, which apparently desiccates the rat quickly, making them drink any liquid they can find. Unfortunately for them, there’s a nice bowl of bleach waiting for them. I can’t count how many rotting stinky rats I have had to crawl under the house and recover. Many times just a pile of maggots.
A: An instruction sheet and video are available that will give detailed step-by-step instructions on how to bait, set, place and dispose of the Victor® Easy Set® Mouse Trap. The instruction sheet and video also give detailed instruction on how to use the firm and sensitive setting and the difference between the two.
Restaurant Pest Control: You want to maintain a professional atmosphere at your restaurant, and that leaves no room for a mouse infestation. Learn some tips and tricks on how to solve your rodent problems.
If you don’t think it’s appropriate to drop the tube into a garbage pail several feet below the upper-story landing, you could affix the whole tube with a piece of string to the landing itself. That way, instead of dropping down into the garbage pail when the mouse triggered the trap, the tube would drop away and dangle harmlessly off the ledge until you recovered it.
Okay, okay, so maybe you want to make something that doesn’t require any tools or drilling or snipping. You’ve still got a whole bunch of options! Like for example, this neat cable-tie trap. We know it requires a tool, but it’s not what you think! In this case the tool is being used as a weight, which is what pulls the cable tie together, essentially trapping the rat.
The modified snap trap approach is a little more difficult to make but can provide good results; A rat snap trap, coffee can, small gauge wire and some hardware cloth with some screws is what you’ll need. First attach the trap to the can by screwing the wood just under the tongue (trigger) to the front of the can. Next cut the cloth about a 1/2 inch bigger than the size of the can. Place the cloth on the back side of the can and mold the edges slightly down around the edges. The concave or protruding side up, use your wire to attach it to the spring loaded snap wire of the trap. The long trigger release arm goes through the cloth and sets the trigger. Test the trap out to make sure the release arm does not block the cloth from covering the entire mouth of the can when it shuts. Bait the back of the can with nuts or peanut butter and set the trap. (you can also attach a board for stability to the back of the can) Catch the mouse alive and release him away from the home.
A: The Victor® Metal Pedal Mouse Trap can be reused or disposed of. It is personal preference. Check the traps frequently to ensure the trap is emptied as soon as the mouse is captured and the traps will last longer. Please note that for personal hygiene and biohazard awareness, disposable gloves should always be worn when installing or recovering any traps.
The most common type of rat trap is the classic snap trap made by Victor.  The trap is so popular because it is cheap and effective.  Victor makes two versions of their classic trap; Standard and Professional.
Location, Location, Location Set the baited trap in areas where you have noticed high levels of rodent activity. Rodents tend to travel along walls, so placement in this location often works best. For maximum effectiveness, use multiple traps, placed at 2 to 3 foot intervals to increase results. Place the trap with the baited end flush against the wall.
Even after setting out the unset rat traps and following the procedure in step #9, you may still have rats that will not go into the snap traps. There are alpha and beta rats in a rat population. The first rats to be caught in snap traps are the beta rats (inferior rats). The superior alpha rats are much more cautious around the snap traps. At this point, use a live trap. Rodenticides may be another choice for you at this point. Rodent baits (the strong single feed baits) are more costly, but will cause much more pressure on the rodent population as they readily take the bait and die.
TRAPPER Glue Boards capture rats and mice without poison. The glue boards are ideal to use in food plants, kitchens, restaurants, food processing plants, hospitals, residences, zoos and other sensitive areas where the use of poison is prohibited or discouraged.