The Victor Electronic Rat Trap is the ultimate in rodent control. It works by delivering a humane, high-voltage shock to effectively kill the invading rat. This powerful device is capable of killing up to 50 rats per set of fully charged batteries (4 C), making it a great value when you’re dealing with a sizable infestation. It’s also easy to use! Get started by simply applying a high protein bait in the provided bait cup, place the trap in a location with high rodent activity and turn it on.
I have ordered rodent traps several times from your company. last time I requested the box be sent without “Victor Rat Traps” printed on the side, (UPS delivering to a restaurant during business hours) and the delivery came in an unmarked box! thanks for listening!
Big momma rat has no chance with the victor electric rat trap. Just a little peanut butter, turn it on, ZAPPP, and dump it out! This one was so big it would hardly come out of the chamber when finished.
Tomcat Glue Traps and Boards come in a variety of styles and formulas, including Original, with Eugenol for Enhanced Stickiness, and SuperHold. For whatever rodent you find lurking in the shadows, Tomcat Glue Traps and Boards are specially formulated to be used on their own or along with baits and mechanical traps as part of your total rodent-control solution.
For over 100 years, we have taken pest control seriously, and have millions of satisfied customers to prove it. We use the latest science and technology to test new and innovated products so we can protect your home with an effective plan suited to your specific needs.
Apparently these have been modified into an inferior design. I had a few (I guess) older model mouse traps that were working fine. I bought four more to spread around, not thinking the design would be any different. But these new ones are impossible to keep set, if you can latch the bar at all. Had one snap while I was baiting another one, with nothing triggering it. The second one snapped as I was trying to place it by sliding it ever-so-gently across the smooth floor. Both happened after several attempts at latching, including grabbing some pliers so the bar might stay put. They are going into the trash. I can catch air easily enough without a trap, but I guess it was fun while it lasted. I couldn’t care less about a refund. I’ll consider the price a lesson learned, and cherish my remaining old ones until wild mice are extinct. Anyone know where I can find some more old ones?
In my articles I recommend some products I use and love. If you buy something through one of those links, I receive a small commission which buys my chickens extra treats! There is no additional cost to you, and it helps keep my information free of charge. To learn more, please see my affiliate disclosure document.
“I’ve tried other brands of traps, but so many times the mice eat the bait but the trap doesn’t trigger. So the bait just becomes a regular meal for the mice. These Victor traps are easy to bait, easy to set, cheap enough to use everywhere, and most importantly, they work!” (Review from Dagarb) Read More Reviews »
Safety Information No chemicals or poisons, built in safety switch and beveled tunnel design protects children and pets No chemicals or poisons, use with caution around children and pets No chemicals or poisons, use with caution around children and pets No chemicals or poisons, use with caution around children and pets No chemicals or poisons, use with caution around children and pets
Also known as “glue boards” or “glue trays,” sticky glue traps are made of pieces of plastic, cardboard, or fiberboard coated with a strong adhesive designed to trap any animal who wanders across or lands on their surface. Glue traps are among the most inhumane devices on the market today.
A simple internet search for no-kill rat traps will also bring up many ““homemade” devices. One uses a liter soda bottle cut apart and fashioned into a funnel with plastic “spikes” cut into the opening. This operates on the same principle as the wire cage funnel trap, with the funnel positioned so that the rat is trapped in the body of the bottle unharmed and ready for release.
We recommend using either glue boards or snap traps( indoors to get rid of rodents. It is important to use the appropriate size trap as a mouse trap is not strong enough to trap a rat and a rat trap is not sensitive enough to trap a mouse. Using baits indoors can lead to a dead rat/mouse in an inaccessible area that causes odor and secondary insect infestations. Read the following articles for great tips on indoor rodent control:
Heads up! By submitting this form, you’re agreeing to our collection, storage, use, and disclosure of your personal info in accordance with our privacy policy, as well as to receiving e-mails from us.
I bought four of the plugin ones off Amazon. They specify the range they work and we get mice in our basement. I plugged them all in downstairs except one I put in my garage. Surprisingly they did work, even on spiders. This was two years ago I think, but a few months ago they stopped working. They may of stopped working sooner because a year ago two stray cats made a home of my garage and the deal was they can stay and I will feed them if they catch mice lol. Which they do lol.
For squirrels, place traps along the wall in the attic or crawlspace, near the bottom of the trees outside your home, and directly on your roof, especially near trees or power lines that may be routes that squirrels take into your home.[15]
I have tried the electronic rat traps. They work good, once. The rats must smell something after that warns them to beware of a similar fate. Back to the old tried and proven Victor traps. Up to 14 and counting. With winter coming, the rats are moving in for a comfortable existence. Traps are getting expensive at the local hardware store. Makes sense to buy a bulk pack!
Wait for the mouse to fall in. The mouse will run up the ruler to reach the food on the opposite side of the coffee can, then fall into the can when the apparently solid surface gives way beneath it. You’ll know the trap has been sprung if you see the bait you laid is no longer there, or if the construction paper has been partially torn. Check the can for the mouse.
I prefer it to snap traps because of the lack of blood and gore – the body is very easily disposed of without leaving a mess behind which is a potential hazard to chickens, pets, wildlife or children.
If you’re using a round bottle rather than a bottle with roughly rectangular sides, it is more difficult to gauge where to place the marks. Try to place the marks about 90 degrees apart from each other around the circumference of the bottle, two on one side of the cut and two on the other.
I bought one from Groupon, only 15US$ I just try it today, try to get rid of cockroach, 2 inches big one from my kitchen. I wonder, will it drive it out of the kitchen into my living room? By the way, the using the device as a hammer comment was funny.
Another Help Website

Glue traps never work to keep rodents away in the long run, and their use will actually backfire. This is because when animals are killed or otherwise removed, the resultant spike in the food supply causes accelerated breeding among survivors and newcomers—and this means increased populations. The only surefire way to keep mice and other animals out of your house is to make it less inviting to them.
It is a stinky process but one of the best ways to prevent these rodents. Take some cow dung cakes and spread them in your attic or garden. When rats eat the cow dung, it will inflame their stomach and lead them to die. Thus, helps get rid of rats outside the house.
Rats compensate for their poor vision by having excellent memories.  Once a rat locates a safe way to get to where it wants to go it will travel that path over and over again.  This is why rats are great at running mazes in lab experiments.
It’s important to re-state, though, that I used it only after I’d spent time getting rid of a large infestation of rodents in my chicken run.  Until you have the population under control this trap won’t be of much use because it can only kill one at a time.
Third, attach jumper cables to the metal plate at the back of the cage. The clips on the cables should just barely fit onto the edge of the mesh cage. Set the trapdoor loading the spring as directed on the product label. Place the electric cage rat trap diy in a rodent-infested area.
My cheap landlord decided to stop having the pest control company come spray for roaches. Now we have roaches. I have tried everything from spraying to boric acid to fogging. Nothing seems to work. I just want to know if these electronic devices really work??? Just cut the nonsense I just want to know if they really work?? Especially if I’m gonna spend money on them.
after quite the outdoor rat infestation, we are now living rat-free 🙂 … thanks to these very effective Victor traps! (and, other items & measures taken below) … the following is what we learned, during our lil’ rat war this past 2017 summer;
5. Place the trap wherever you’ve seen signs of rodent activity or along the wall where rodents like to travel. The baited end of the trap should be placed flush against the wall. For best results, place multiple traps at 2 to 3 foot intervals.
Use two traps in the position mentioned above or place them length-wise, end-to-end (red “V’s” on traps pointing towards each other) so that the bait pedal end will be encountered first as mice approach from either direction. For trickier spots like walls, air ducts, and crawl spaces, check out our article here.
A few years ago I had two Ultrasonic Cix machines to keep mice and packrats away from the vehicles. I had lost 2 motorcycles and a truck up to that time to rodent infestations. The nearest neighbor 1000 feet away started to complain about HEARING the machines. She called the cops, file a lawsuit and her insurance company A–S—E send a team out here to take measurements. The insurance company doesn’t care who they harm if you are not one of THEIR policyholders. Their “experts” “detected” the sound at varying places. This woman won her lawsuit, a lot of money from my homeowners,t and the judge ordered the ultrasonic machines removed and never replaced. Since that ruling, I’ve lost another truck and have resorted to poisons. As for this neighbor, the manufacturer claims that ultrasonic devices are inaudible to humans and do not cause harm. Yet SHE claims that she can hear them 1000 feet away! She must be a rat! (She is!)
Bait the trap with a high-protein substance, such as peanut butter, chocolate or hazelnut spread. Place the bait on the metal bait pedal using a Q-Tip, toothpick or another tool to mask your human scent.
THIS is an exceptional electronic execution chamber for rats! I reviewed all of the brands available and chose this one as my best prospect, and I was right. What surprised me though is the fact that very little of the trap’s advantages were advertised before I purchased it. For instance, the clever physical design of the chamber resists the rat’s auto-response once electricity begins to flow and prevents him from spontaneously “leaping away” from the deadly electric panels. Also, since having caught/killed several rats, I noticed that the bait is always consumed before the rat is electrocuted — I suspect that there is 5-or-so seconds delay before the electricity flows, giving the rat time settle down and become less alert while enjoying the bait… then, it’s all over for him with a 2-minute constant electrical surge that kills him and assures no quick spontaneous restart of his heart… on a small scale perhaps, but some real engineering! My compliments to Victor. (BTW, the green light is not very good, but who cares)
This is probably the easiest of them all to make! All it takes is paper. Well, alright, some tape too, and definitely a bucket or trash can for the rodents to land in, but that’s about it! Just fold the paper, bait the end, and hang it halfway over a ledge. By the time the rat realizes that the bottom won’t hold its weight, it’ll be too late. Keep in mind that rats and mice are amazing jumpers and could free themselves depending on how large the container is, or if there’s water in it.
I’m familiar with the Ultrasonic repellers–I bought two of them last year after discovering squirrels in our new home. They were scratching around all through the walls and even between the first and second story floors!! I was very concerned about the damage to insulation and wiring. We were told they would only work in ‘open’ spaces–so I installed them in the attic space. It took nearly 3 1/2 months but seemed to be ‘mostly’ effective. They are very persistent and keep trying to return. I’m hearing one again recently. I was wondering–has anyone tried the ones that work ‘through the wiring’?? That is supposed to be effective between floors and walls!