• multi-front approach: utilize some additional artillery besides these Victor traps: we are using outdoor bait boxes with “Bromethalin” bait, so they will eat and go back to their nests and perish in a few days…
The Victor Electronic Rat Trap is the ultimate in rodent control. It works by delivering a humane, high-voltage shock to effectively kill the invading rat. This powerful device is capable of killing up to 50 rats per set of fully charged batteries (4 C), making it a great value when you’re dealing with a sizable infestation. It’s also easy to use! Get started by simply applying a high protein bait in the provided bait cup, place the trap in a location with high rodent activity and turn it on.
A few years ago I had two Ultrasonic Cix machines to keep mice and packrats away from the vehicles. I had lost 2 motorcycles and a truck up to that time to rodent infestations. The nearest neighbor 1000 feet away started to complain about HEARING the machines. She called the cops, file a lawsuit and her insurance company A–S—E send a team out here to take measurements. The insurance company doesn’t care who they harm if you are not one of THEIR policyholders. Their “experts” “detected” the sound at varying places. This woman won her lawsuit, a lot of money from my homeowners,t and the judge ordered the ultrasonic machines removed and never replaced. Since that ruling, I’ve lost another truck and have resorted to poisons. As for this neighbor, the manufacturer claims that ultrasonic devices are inaudible to humans and do not cause harm. Yet SHE claims that she can hear them 1000 feet away! She must be a rat! (She is!)
I bought one from Groupon, only 15US$ I just try it today, try to get rid of cockroach, 2 inches big one from my kitchen. I wonder, will it drive it out of the kitchen into my living room? By the way, the using the device as a hammer comment was funny.
We carry Trapper Rat Glue Traps, Catchmaster Cold Temperature Rodent Traps, Trapper Plastic Tunnel, Trapper Cardboard Tunnels, Maxcatch Giant Glue Boards, Rat Glue Books, and Trapper Glue to make your own boards.
If you don’t think it’s appropriate to drop the tube into a garbage pail several feet below the upper-story landing, you could affix the whole tube with a piece of string to the landing itself. That way, instead of dropping down into the garbage pail when the mouse triggered the trap, the tube would drop away and dangle harmlessly off the ledge until you recovered it.
The Victor Metal Pedal Rat Trap makes rodent control easy. Once a rodent triggers the pedal, the trap immediately springs closed to eliminate the pest on contact. After a catch, simply throw away the entire trap for quick and clean removal or dispose of the rat and reuse the trap.
A: The Victor® Metal Pedal Mouse Trap can be reused or disposed of. It is personal preference. Check the traps frequently to ensure the trap is emptied as soon as the mouse is captured and the traps will last longer. Please note that for personal hygiene and biohazard awareness, disposable gloves should always be worn when installing or recovering any traps.
No, guys around. I shall wait until tomorrow and if still there I will dong it on the head with a glass bottle, put it into an old dog food plastic bag and put it in the bin for rubbish collection. That is where they belong. Not around residential housing.
Known for the most innovative rodent control products on the market, Victor Electronic Rat Trap is the only rat trap with a patented 3-plate design to prevent escapes. Easy to use, the trap is simply baited, placed against the wall and turned on. The trap uses advanced smart circuit technology to sense when a rodent enters the units. Once the rodent is inside, the system delivers a humane, high-voltage shock to effectively kill the rat or mouse in seconds. A green indicator light illuminates when a rat has been exterminated and is ready for removal. Rodents can then be dumped directly into the trash for no-touch, no-view mouse control. Since rats have the ability to restart their hearts after an electrical shock, the Victor Electronic Rat Trap applies shock for 2 minutes ensuring high kill rates. Additionally, the Victor Electronic Rat Trap is the only trap that automatically resets after an irregular escape. Safe for use anywhere in the home, the Victor Electronic Rat Trap is ideal for attics, garages, basements, sheds, and kitchens. A lifetime investment, the Electronic Rat Trap is easy to clean and can be reused indefinitely. For effective rat control, one set of 4 ‘C’ batteries will eliminate up to 50 rats, and a red light indicates when batteries need replacing.
If you place the trigger bar on the right side of the bait pad towards the “S” then the trigger is set to “Sensitive”.  This means that the trap is harder for you to set but easier for the rat to trigger.
ANSWER: There is limited data on how well electronic or high-frequency sound devices work for household pest control. These devices may be called ultrasonic, electronic, microvibration or electromagnetic pest repellers. The manufacturers state that they use high-frequency sound waves or electromagnetic output to repel insects (cockroaches, fleas, house flies, mosquitoes, rodents, moles, and other pests).  There is truly no data, aside from anecdotal information on various internet sites, as to the effectiveness of these devices.
After being driven to distraction by the transformer noise from electronic devices such as tv’s, computer monitors, fluorescent lights and anti pest devices my parents sought out my GP, and I was initially diagnosed with tinnitus. However, knowing it was the devices I was hearing, as unplugging them stopped the noise, my parents paid for a private hearing tests which proved I was able to hear frequencies beyond the supposed 20,000 Hz barrier.
After my encounters with the mouse who had gotten stuck in our glue trap, I wasn’t able to sleep for several nights without the paranoia that every little sound I heard was made by a small suffering mouse.
How to Set Your Trap Learn how to bait and set the classic mouse trap with the help of experts at VICTOR®. Once set, a rodent triggers the metal pedal, and the trap immediately springs closed to kill the mouse. Then, simply lift the rugged metal kill bar to dispose of the body. The trap can be disposed of, or reused many times over, at your discretion.
Once the wire is through both ends, make sure the wire extends a few inches past the bucket on both edges. With the threaded can centered over the bucket, crimp the wire at both ends of the can. This will keep the can sliding to the edge of the bucket which would defeat the trap.
Since rats prefer enclosed, safe locations, use Protecta Bait Stations with the T-Rex Snap Traps. These stations will shelter the rat; encouraging it to enter and protect non-targeted animals and children from the harm of the snap trap. The Victor Snap Traps are fine traps, but its height will not fit into bait stations. If this is the case, you can get a cardboard box, cut holes in it and place it over the Victor Snap Trap. This method is not tampered resistant, however.
Apply a small amount of high-protein bait, such as peanut butter, chocolate or hazelnut spread to the metal pedal on the trap as shown. Be sure to use a Q-tip, toothpick or another tool to bait so your scent is not transferred onto the trap.
Obtain a one liter plastic water bottle. A similar bottle would work as well, but one liter water bottles are ideal because they are long and narrow, and often have flat sides which allow them to sit undisturbed. You could substitute a two liter bottle as well. Whatever type of bottle you choose, ensure it is transparent and composed of thin, pliable plastic.
more information about

Try using a glass bowl as your main catcher. All this trap requires is a few household items and a delicate touch, and you’ll have a super simple, but effective trap on your hands! If you’ve got a really curious rat lurking around, this might be the perfect way to catch him without all the fancy crafting.
Position traps along active rodent runways, such as along walls, under large kitchen appliances, in cupboards, and other areas where rodents travel. Be sure to fit the glue trap flush against a wall where rodents will run over and stick to it. Avoid placing traps in corners indoors. Since glue traps hold the mouse in place to show evidence, you can utilize glue traps to track where rodents are traveling. If you don’t catch a mouse within 2 days, move the trap to another spot. In addition to capturing mice, Tomcat Glue Traps of all varieties also trap insects such as spiders, roaches, or even scorpions.
Useless….Managed to set it once…and tried to use it again and would not set…Went on to the next one…everytime I got it set and placed it as gently as humanely possible..it would spring..Finally threw them all out and resolved myself to making friends with my mouse. I have named Him ” Al”
This is an innovative take on an old idea. Inspired by an antique mousetrap that operated as a one-way door, the mice are baited to travel through a hole, but are unable to return through the same entrance due to wires protruding from the hole. Sounds gnarly, but actually the wires leave the mouse completely unharmed through it’s decent through the hole. It’s only when the mouse lands, does it realize that the wires prevent it from returning. This is a simple mousetrap that can easily be converted into a trap for larger rodents and can be used multiple times.
It’s important to re-state, though, that I used it only after I’d spent time getting rid of a large infestation of rodents in my chicken run.  Until you have the population under control this trap won’t be of much use because it can only kill one at a time.
“I’ve tried other brands of traps, but so many times the mice eat the bait but the trap doesn’t trigger. So the bait just becomes a regular meal for the mice. These Victor traps are easy to bait, easy to set, cheap enough to use everywhere, and most importantly, they work!” (Review from Dagarb) Read More Reviews »
I bought these in hopes to use them as apposed to poison or dangerous traps. I have a few animals and if they were to, by any fashion, get a hold of the poisoned rat or step in a trap, I would be devastated. Let us not mention how my wife would feel. So I purchased. Wrong!! This rat actually ATE parts of the boards, flipped some over, and it totally didnt catch him. Well i blame the fact that it happened to be really cold that week. If you buy these be sure to place them in the rats routine path and to possibly secure them with say a nail or small screws or even duct tape. Anyway! I love domyown! They have never failed me, this product was just not te best choice for my particular rat. He is too smart.
A. If you don’t catch any mice or rats by the sixth day after you put out the traps, put on gloves (so you don’t transfer your scent to the trap) and move the trap to another rodent runway. But make sure the traps haven’t become covered with dust or bridges of debris that give mice and rats the traction they need to escape. If the glue isn’t smooth and continuous, put out a new trap.
Check the trap frequently. When you see the tube sticking upright out of the trash can, it means the trap has been sprung. Look down the tube to ensure the mouse is within. Remove the tube and, keeping it upright with the open end up, take it at least five to ten miles from your house, preferably in an area free of housing.[3] Dump the mouse out of the tube gently in a field or meadow.
Absolutely worked to get 2 very smart rats. They have been running in and out of my house for months. I tried the electric rat zappers from two different models but these two rats would not even trip the trap. 15 minutes after going up the first rat was caught. A little blood was on the trap from either the nose or mouth so i placed the entire thing in the garbage with the rat hanging from it. You can absolutely clean and reuse the trap- it was not damaged. But i purchased a 9 pack so i placed another trap and in a few minutes a heard a snap. The second rat was finally caught !!! This one did not bleed at all so i opened the trap and dropped him in the garbage bag. I used a very small piece of soft yellow cheese which i worked into the hook on the trap. I really got lucky catching the first rat cause i saw her stomach area moving while she laid dead- she was about to start populating my house. I used gloves while handling the traps and set the traps on the S setting. Be careful I snapped the very edge of a finger and it hurt. I would hate to see an good finger snap on these things.
Place rat traps in high-activity areas of the rat colony. These areas may include darkened corners, along walls, behind appliances and objects, and all areas where droppings are evident. Since rats need to touch surfaces as they move, place them accordingly.
No kill rat traps are slowly gaining in popularity as more and more people become concerned with animal rights, although they have get to gain widespread popularity . Rats do have a place in the ecosystem as scavengers clearing out dead animal and plant materials. They are also an important food source for carnivorous species such as owls, hawks, bobcats, mountain lions and many other apex predators.
The original wood-based wire snap trap, the Victor Metal Pedal Rat Trap provides instant rodent control and is safe for household use. Trusted to control rats for over 100 years, this trap allows for clean and quick trapping – ideal for maximum rodent. Once a rodent triggers the metal petal, the trap immediately springs closed to eliminate the pest on contact. It can then be easily disposed of for quick and clean removal. 7 in. x 3 1/4 in. x 1/2 in. Place station near baseboards, corners,
• neighborhood activism: get your neighbors involved, as the problem is very unlikely limited to your property… rats eat dog feces, compost, grille remains, bird seed… and just about anything, but, in our neighborhood, they were feeding (or are still feeding) at a neighbor that does not clean up after their dog and a neighbor composting… and, living at another neighbor that has let their garage and yard go to squaller…. thus, our yard was a traffic route between feeding and nesting. but, it is a city wide problem, as we have learned via nextdoor website for our city… so, neighbor involvement is a must, as you may eliminate them from living or feeding on your or adjacent property, but they will still be in the area and will likely return. if you do not know your neighbors and do not want to do the door-to-door thing, then join nextdoordotcom for your city and post something like “Unwanted Neighbors – Rats!” … this is how we learned that it is a pervasive, city-wide problem and we were both receiving and disseminating information via this site… though i appreciate that most of us no longer “need” neighbors in this era, you do NEED your neighbors as allies in this war!
If you reach a level of desperation like I did, I can tell you that this is worth the money and having faith. I thought it was buggy and was planning to return, esp. with mixed reviews and no luck the first night… then, well, look at the photo!!! 😀
62Click to share on Facebook (Opens in new window)62Click to share on Twitter (Opens in new window)1K+Click to share on Pinterest (Opens in new window)1K+Click to share on Google+ (Opens in new window)Click to share on Tumblr (Opens in new window)Click to share on LinkedIn (Opens in new window)Click to print (Opens in new window)More
If you find yourself in this situation and are in need of some mass exporting (of course, I’m talking about the mice here, not your extended family members), here are a few simple DIY mouse traps that you can make out of several items that you probably already have around the house.
I came across this video a couple years ago while I was living in Baltimore City, Maryland and for as young as the kid may be or sound, he made an almost genius trap that worked great for us at our row home rental. The idea is the shoe box, looks like a shoe box.